Matek F722-HD | Flight Controller for 8 motors Cinelifters & Wings

€44.90
(No reviews yet) Write a Review
Availability:
same day shipping
Shipping:
Calculated at Checkout
Adding to cart… The item has been added

The new Matek F722-HD is a the Makek's idea about how a CINELIFTER SPEC flight controller should be!

It features a dual JST-SH 1.0 plug connection for two 4 in 1 esc, another one for direct  DJI DIGITAL FPV gear. Easy and clean!

farins-frames-f722-hd-layout-00.jpg

Furthermore, it natively support both Betaflight and INav, plenty of UART ports , 1 Softserial_TX option and 10 Dshot/PWM outputs, that make it good for either multirotors and wings!

farins-frames-f722-hd-wiring-multi-rotors-00.jpg

farins-frames-f722-hd-wiring-wing-planes-00.jpg

All packed with the good quality, functionality and reliable quality Matek get us used since the begin!

SPECS:

  • MCU: 216MHz STM32F722RET6
  • IMU: MPU6000 (SPI)
  • Baro: BMP280 (I2C)
  • Blackbox: 32M-byte Flash memory (SPI)
  • OSD: Support external DJI OSD/FrskyOSD,  No Analog MAX7456 OSD built-in
  • 6x Uarts with built-in inversion
  • 1x Softserial_Tx option
  • 10x Dshot/PWM outputs
  • 1x I2C
  • 4x ADC (VBAT, Current, RSSI, AirSpeed)
  • 2x SH1.0_8pin connector (Vbat/G/Curr/Rx3/S1~S10)
  • 1x SH1.0_6pin connector for DJI FPV Air Unit
  • 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
  • Switchable 8V output
  • PWM camera control: Yes
  • TR/SA VTX control: Yes
  • WS2812 Led Strip : Yes
  • Beeper : Yes
  • RSSI: Yes
  • Analog Airspeed sensor: Yes
  • Digital Airspeed sensor: Yes

Power:

  • Input: 9~36V (3~8S LiPo)
  • BEC: 5V 2A cont. (Max.3A)
  • BEC: 8V 2A cont. (Max.3A)
  • LDO 3.3V: Max.200mA
  • Battery Voltage Sensor: 1:10 (Scale 110)
  • No Current Sensor built-in

Supported Firmware:

  • BetaFlight unified target: MATEKF722HD(MTKS)
  • INAV target: MATEKF722PX

Dimensions:

  • Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm
  • Dimensions: 36 x 36 x 5 mm
  • Weight: 6.5g

Downloads: