SpeedyBee F7 V2 is the world first wirelessly configurable Flight Controller! Tune it via Bluetooth by the SpeedyBee APP, flash it and check your BlackBox via WiFi! No need for any add-on dongles, just pair it with your smartphone!
This stack is not only this: it's equipped with cutting-edge components and it has been designed for top-notch performances!
The FC can count on:
- F722 MCU
- BMP280 barometer
- the well known MPU6000 Gyro
- support for both Betaflight and Emuflight
- 9V 2A BEC
Ready for Digital FPV gears like DJI Air Unit or Caddx Vista and Nebula.
All this power can be easily controlled in palm of your hand by your smartphone. Any time, anywhere!
Icing on the cake: it has a cutout on the edge for the back of the FPV camera and to allow the most compact built you can imagine and the center mounted gyro guarantees perfect flight balance!
Definitely this is the ultimate Flight Controller for any Racing, Freestyle and even long range FPV quad drones!
SpeedyBee F7 V2. Try the difference!
Specs:
- Barometer: BMP280
- IMU(Gyro):MPU6000
- Bluetooth/Wifi Chip:
- Bluetooth for firmware config.
- Wifi for data transfer - firmware flashing and BlackBox analysis
- 8P JST Connector to ESC
- MCU: STM32F722
- Flash: 16Mb for Blackbox
- USB: Type C
- OSD: AT7456E
- BEC: 5V 2A + 9V 2A
- 6P JST Connector to DJI FPV System
- UART: 5 Sets
- Firmware: Betaflight/Emuflight
- Target: SpeedyBeeF7V2
What's in the box:
- 1x SpeedyBee F7 V2 FC
- 1x JST 8pin 30mm
- 1x JST 8pin 15mm
- 1x DJI 6pin 80mm
- 5x M3*30 screws
- 5x Nylon Nuts
- 5x Grommets M3*8mm
- 5x Grommets M3*6.6mm
Wiring Instructions:
