The brand new Zeez F7 3030 V2 now improved with everything you could want!
- 9V@3Amp BEC for direct DJI Digital FPV systems power
- on-board TBS Crossfire Nano RX & TBS Unify Pro32 Nano v1.1 mount
- 8 motors support for cinelifter X8 FPV drones
- I2C and 5 UART ports
- easy to solder pads and improved filtering power
..and much more!
Zeez F7 3030 V2 is definitely designed to respond the modern FPV and filmmaker drone pilot call!
- Mounting holes: 30×30
- 3S to 6S input
- 5V & 9V up to 3A continuous BECs
- STM32F722 MCU
- MPU6000 Gyro/ACC for smooth performance
- BMP280 barometer
- 128MB Onboard flash
- OSD chip Onboard
- 5 available UART
- I2C port
- TBS Crossfire Ready
- TBS Unify Pro32 Nano v1.1 Ready
- DJI Digital HD FPV Ready
- LC Filter for 5V VTX
- USB Type C connector
- Onboard RGB LED distribution for clean wiring to the LED on the arm of the quad.
- Logic Side and USB current protection
Wiring Map & Manual
What's in the box:
- Zeez F7 V2 3030 Flight Controller
- 4x Aluminum Standoff
- 4x Aluminum Nut
- ESC to Flight Controller cable 8 Pin to 8 Pin JST SH 1.00mm connector
- ESC to Flight Controller 8 Pin to Free wires (with JST SH crimp)
- ST SH 1.00mm connector • (1X) JST SH 8 Pin Plastic Housing
- JST SH 10 Pin Plastic Housing
- 2x 2.00mm Header Pin for VTX connection
- 2x 2.54mm Header Pin for Receiver connection
- JST 6 pin to AirUnit Connector
1 Review Hide Reviews Show Reviews
Design and quality of this flight control are extremely High, Very well designed and manufactured. The design of the pads result in very easy soldering. The packaging is very accurate. The best FC I ever used in a build.