ZOHD KOPILOT LITE - GPS RESCUE STABILIZATION SYSTEM FOR WINGS

€39.90
(No reviews yet) Write a Review
Availability:
same day shipping
Shipping:
Calculated at Checkout
Adding to cart… The item has been added

Introducing the ZOHD KOPILOT LITE, the EASIEST Autopilot with GPS for you FPV wing and RC Plane!

farins-frames-kopilot-cut-00.jpg

Yes, you got it well: GPS! This device integrates the easiest, hassle-free RTH feature for your FPV Wing or RC Plane with NO NEED for any iNAV or ArduPilot or PC or any other head-ache.

Bring it back home safe with just a switch click of your remote control!

Let's say you're new to FPV wings, no experience with any typical Flight Control unit and firmware, you are out of the loop of PID's, SAT fixing, OSD setup but you are still bleeding for an immersive First Person Video flight. The Kopilot Lite is just for you! Literally 10 minutes for installation and super easy setup and you are off to the field to fly!

The ZOHD Kopilot Lite is compatible with either s.bus and PWM receiver, no matters if TBS Crossfire, Frsky, Futaba or Spektrum: minimal wiring, no need for soldering, no need for programming, no need for uart ports! Just the snap of a plug!

farins-frames-kopilot-cut-01.jpg

Now time for servos to be plugged in:

farins-frames-kopilot-cut-02.jpg

The detachable Adjustment Board will allow you to save some gram more: set the RTH or RAD fencing mode (yes, with this thing you can make your plane fly in a specific area with no chance to go away), adjust gains for a smooth response and then simply unplug the Adjustment Board! This means the ZOHD Kopilot Lite System will add an easy GPS Rescue and Return to Home capabilty even to smaller planes and wings like the DART 250g!

Do not give up on your need for FPV, just make it EASY with ZOHD Kopilot LITE!

Note: this item is for FPV Wings and Planes ONLY! NOT for quadcopters

Let's recap!

  • Easy Installation, minimal wiring. Super easy setup
  • Powerful stabilization and RTH algorithm
  • Return to Home (RTH) Fence (RAD) and Stabilization modes on a 3 position switch
  • Supports T-Tail, V-tail and Flying Wing / Delta configurations
  • Mini-size GPS unit for ultra-light setups
  • Fast SAT lock
  • Adjustment board removable for a light-weight setup
  • Launch assistant and motor blocking for no SAT fix
  • AIL, ELE, THR, RUD + AUX to control your servos. Landing gear and flaps go straight to RX
  • Computer-free programming
  • Easy to transfer between planes
  • Completely transparent: switch it off and use it as a mixing board only

Take a look here for a fast CROSSFIRE RX setup:

What's in the box:

  • ZOHD Kopilot Autopilot System Flight Controller with GPS Module
  • Mounting support
  • Adjustment board
  • Double side tape
  • Screw driver
  • User manual

SPECS: 

Supported Aircraft

T-Tail, V-tail, Flying Wing / Delta Wing

Supported Receiver

PWM, PPM, S-Bus

Supported Mode

Home (RTH), Fence (RAD), Stabilization modes

Servo Connector

4

Main Controller

32-bit MCU

Sensors

High-precision 3-axis gyroscope and 3-axis accelerometer

Gyroscope Scale Range

±2000dps

Accelerometer Scale Range

±4g

Operating Temperature

-30℃ - 70℃

Voltage

5V

Size

32x32x10mm

Weight

Unit: 12g, GPS Module: 8g